ICT Educational Tour Narrative Report Essay

Learning is not only gained in school but also from the exposure outside the school premises, according to the tour committee on its rationale. Through this, they convince us to join the tour, The B.S. Information Technology Educational Tour 2013 in Manila. With the effort of everybody especially the faculty it happened last December 2-5, 2013.The purpose of it is not just for self-satisfaction but for the improvement of one’s mind in terms of learning knowledge, actual experience both in IT and form good camaraderie between fourth and third year students. Furthermore, it let the students to have an actual observation on how the different technological industries operate. Topics Learned As we visited different industries, somehow we learned from them. Like in TOEI Animation and Cutting Edge Productions, they taught us step by step processes on how to make an animation from lay outing to finishing .Although, there’s no multimedia subject in our curriculum but atleast they gave us an idea on how it works. In addition in UP-Diliman, we also benefited in the seminar in Android Apps, using Ubuntu an open source operating system and their students guided us to their different IT laboratories. Ma’am Christy told us the projects of their students focus in security problem to address, enterprise network and some information about AI or the Artificial Intelligence. Though, it is not already reach beyond my knowledge. Then on our third day, I learned from one of our tour how technology works in a factory. Imagine a fully automated and computer controlled manufacturing facility untouched by human hands. Industry Visited Our first destination is the Makati City Traffic Management System which is located at the Makati City Hall. This command control and communication  center was started in 2007.It is composed of 8 big and 48 small monitor screens that is open 24/7.They have installed CCTV’s in different streets and vicinity along Makati. In addition, each camera has a 30 times zooming capacity and can capture objects within 800 through this; they can monitor accidents or the flow of traffic in Makati. We’ve also tour around the Makati City Hall itself including the conference room, Mayor’s Office and session hall etc. After this, we continued to Sir Boy’s Republic for our lunch. Exactly 2:31 pm, we are now in TOEI Animation located in Eastwood.They are behind the famous animes like One Piece, Sailormoon, Digimon and etc†¦ This Company was started in 1986 and a 100% subsidiary Japan Animation and the first 2D animation to use system. After TOEI Animation, our next stop was the Cutting Edge Productions. Just like TOEI, it is also an Animation company. Some of their works are Dayo, shampoo commercials and etc.. We’ve ended our day by eating our dinner at Star City. Eventually, after eating breakfast in Wendy’s, we proceeded to ABS-CBN for studio tour. The acronym stands for Auto Broadcasting Network-Chronicle Broadcasting Network, one of the largest TV stations in the country. Then again eat our lunch at Sir Boy’s Republic. In the afternoon, we attended a seminar in UP-Diliman Campus. After that, we transferred to Engineering Building to make rounds. We had seen their highly modernized library and IT laboratories. On the third day of our tour, we dropped by at Somethin’ Fishy at Eastwood to take or breakfast. Then our instructors let us took a walk. After that, we continued to our next destination. The Gardenia Bakeries Phil which is located in Gardenia Centre, Star Avenue LIPP, Mamplasan Laguna. They gave us free sample of their products then we took our lunch in Tagaytay City. Then, we continued our tour to Enchanted Kingdom. There we enjoyed the different rides and returned to Hotel happy and satisfied. According to our tour guide being a tourist in Metro Manila, we need to visit Intramuros so we dropped by and took a long walk. After this, we ended  to University of Sto. Tomas which is located in Espaà ±a.Then for the last time, we returned to Sir Boy’s for our lunch. As follows, we proceeded to MOA, owned by Henry Sy.Some of the students met their relatives while others bought Pasalubong and the rest took window shopping. And the saddest part was to say goodbye and we continued to our last bus stop, the NAIA. Application on your Course After the tour, I have acquired new realizations, knowledge that I may use in my course. I can apply that self-realization in my motivation to pursue my degree. Though I can’t say that I can be an App developer or Animator someday but I was unable to realize the importance of technology, the possible jobs,the importance of being a skilled IT worker and many more. Therefore ,the educational tour is not only for the enhancement of theoretical learning but rather giving a student a complete idea of what the course may offer to his or her life and for the preparation in the future job. Personal Experience Most of my first times happened during our tour. It may be terrifying or death-defying experiences but I don’t have any regrets in joining the said tour. Although my aunt wasted a huge amount of money just to send me to this tour. It’s okay at least we learned, we experienced and feel motivated. It’s my first time to ride in a plane. I feel a little bit of nervous at first because I have a fear in height but I’m happy that I’ve conquered my fear. Then after going back to Manila it’s a De javu feeling. I was there not for any reason but to enjoy all the proceedings and being a tourist. It is a privilege because all you have to do was to eat, listen, learn, observe, unwind and sleep. I have been there a long time ago but it’s my first time to go to ABS-CBN which is one of my dreams. Eversince, I have been an avid fan of Kapamilya Stars. Although I feel disappointed because I hadn’t seen my favorite stars but knowing that they also reside there it’s a pleasure to me. The Eastwood City was also amazing because of its high structured buildings, it is also considered as one of the business center of  Metro Manila. Opportunities can be seen anywhere since that there’s a lot of jobs. They say there’s a lot of job but the question is the skills of applicants. I’ve realized that in order to succeed you need to strive hard ,be patient and the most important is study hard to acquired proper skills that may use in the future. Next first time is going to Tagaytay City; it’s a relaxing ambiance with cool weather. After that was the Enchanted Kingdom experience. The fun really never stops. Aside from bonding with my classmates and friend it’s a full package experience. The ride on Space shuttle and Rio Grande was all my first time and according to Christian if he will be given a chance he’ll go back there or shall I say we will if there’s a chance. On our last day, the Intramuros and UST experiences are also amazing. Intramuros being one of the most important historical place and unique events in the country happened there. While UST is also nice because of its place which is awesome. Aside from the cute faces of their students, they are also kind and hospitable and they entertained and answered all our questions in mind. I’m so blessed and thankful that I was able to join the tour. My deepest gratitude to the tour committee for their patience in asking for our balances and letting this to happened. And also to Sir Nemz, our tour guide for guiding us during the tour. Though, he is not a certified teacher but he is more than that. He told a lot of trivia’s, knowledge about the place and he made us laugh.

Of mice and men was written in a period when mentally disabled people were treated like outcasts Essay

Of mice and men was written in a period when mentally disabled people were treated like outcasts. They were treated like that simply because they were different. Mental people were thought to be almost like a different species. Black people were considered outcasts because they had different skin-colour to white people. Also women were treated like property that belonged to men. The novel was written during the Great Depression, where jobs and employment were scarce. The USA was quite a poor country back then. Lennie is considered an outcast because he is mentally disabled. Mentally disabled peopled in that time were treated badly. They were locked up and separated from the rest of society. This is known as segregation. They also use to be sterilised. This means that they weren’t allowed to have babies or reproduce. Those are all very horrible. However, lennie was not treated like any other mental people. This is because he has George to look after him, and many other mentally disabled people didn’t have anybody to care for them or to look after them. But Lennie had that someone, and it was George, so that is what’s different about Lennie. In the ranch, however, lennie was considered an outcast. We know this because lennie says to crooks, ‘Ever’body went †¦ slim, George and ever’body. George says I gotta stay here.’ This shows that Lennie is not allowed to go into town like the rest. He’s not considered good enough do anything with the lads. Lennie is not allowed to play games, such as horseshoe, with the others. ‘From outside came the clang of horseshoe†¦ only Lennie was in the barn.’ This shows that while the others played their games lennie was made to stay inside the barn. He is like an outsider or a refugee. Crooks is considered an outcast simply because he is black. In those days, black people were treated very badly. They were treated differently from white people. Black people were often never called by their first names. Crooks is considered an outcast on the ranch because he’s black and isn’t referred to his real name, it’s either ‘crooks’ or ‘nigger’. Crooks also has his pride ‘he is a proud and aloof man’. This means that crooks is not allowed inside the bunk house because he’s black. He’s allowed to play sports outside the bunk house, but not inside it, which is why he had a separate room. ‘I ain’t wanted in the bunk house †¦ cause I’m black.’ This shows the racial issue of how black men did not mix with whites. Crooks is being segregated in this way. That is also another reason why crooks is an outcast. Curley’s wife is presented as an outcast. This is because women in those times were treated as a piece of property by the men. They may have also been treated as a sex object by their husbands; there to cook, clean and have babies. In the ranch Curley’s wife is considered an outcast because she’s a woman. Also she is related to the boss. She is not allowed to play horseshoe or go into town or even talk to anyone. We know that when she was in the barn with lennie, ‘I get lonely†¦ you can talk to people, but I can’t talk to nobody but Curly’. This shows us that everyone else can talk with whom they like, but she can only talk to her husband. In conclusion, 1930’s America is presented as a racist country who thinks black should be separated in terms of class. It is presented as a country that thinks mentally disabled people should be separated from the rest of society. It was also a sexist country who treated women very badly. A very uncivilized country.

Renovascular Hypertension Essay Example | Topics and Well Written Essays - 500 words

Renovascular Hypertension - Essay Example Renovascular hypertension may be also caused by malignant hypertension or renal artery stenosis. The most common cause of renovascular hypertension is artery stenosis, a narrowing of the artery pathway due to a buildup of plaque. The low blood flow to the kidneys results in an increase in the production of renin, which results in peripheral arteries to constrict and raising the body's blood pressure. Renovascular hypertension is evident in approximately 6 out of 100,000 people (Renovascular Hypertension 2006). Age of onset varies depending on the cause but is most common in men over the age of 45 with atherosclerosis, and in women under the age of 45 with fibromuscular dysplasia (Renovascular Hypertension 2006). Children with fibromuscular dysplasia are at high risk as are people whose diets are high in salt, heavy metals, suffer stress, or have a family history of renovascular hypertension. A patient that has unusually high blood pressure for an extended time that is difficult to control should be suspect for renovascular hypertension. In addition, the presence of abdominal, epigastric or flank bruit, a noticeable decrease in kidney size, or a recurrent pulmonary edema may also be noticed in a patient suffering from renovascular hypertension.

MGT Essay Example | Topics and Well Written Essays - 1000 words

MGT - Essay Example FoldRite Furniture Company was started in the year 1986. The company has been operation with the management being involved in a number of initiatives that have been aimed at its continued growth and profitability. The company operated in a very competitive environment and there was always a need to be more innovative in order to stay ahead. In 2006, there was a change in ownership which warranted some changes in management. However, the company had experienced a growth rate of over 3.5% from 1999 to 2006. This is evidenced by the increase in revenues from $47.5M to $60.3M. This recorded growth was well above that of the industry at the time. However, the company had a cyclic nature at this time as there was a growth and decline sort of scenario which was occasioned by a financial turmoil and loss of yields and general decline in productivity occasioned by high staff turnover. The turnover of staff meant that the company was mainly reliant on the inexperienced staff members at most ti mes. There was also an increase in the production lead time and increased margins. In 2007, the company began undergoing a transformation that was started when a new CEO was recruited. The new CEO, Marshal Epstein only made two changes to the structure of the organization and these proved to be vital in its rejuvenation. The first major change was that he reduced the number of products that the company offered while at the same time embarked on the consolidation of manufacturing. The other major change was that he reduced the lead time to a maximum of a fortnight and also made sure that the shipping policy was changed to reflect only two days. Despite the recession in the latter years, the company was profitable in 2009. FoldRite has a very dynamic market structure and although the demand for their products is seasonal, they have managed to spread out and rely on a large market base. Currently, the largest market segment is the

Commercial Law Research Paper Example | Topics and Well Written Essays - 3250 words

Commercial Law - Research Paper Example On the other hand, there are cases in United Kingdom and Singapore that similarly dealt with your situation. In view to this, the following discussion will deal on these cases, and ostensible authority in the United Kingdom to further your knowledge on your current situation. Facts As an overview, Cheng-Han Tan cited that the agency relationship occurs when a principal allows an agent to represent itself, wherein the agent also agrees with the representation. There is a mutual agreement between the principal and the agent in the agency relationship, even in instances that either one disclaims or does not pronounce the mutual agreement. Also, the agent can be given authority, which is granted by the principal to enter within a contract with a third party. However, if the contract entered by the agent with the third party is not authorised by the principal, then the principal is not committed to the contract. Moreover, ostensible authority appears only in specific circumstances. Ostens ible authority comes in view when the agent surpasses the authority given by the principal, when the agent is no longer recognised as an agent of the principal, or when a person, never been recognised as the agent is then permitted to be the agent.1 In addition, Steyn LJ cited that ostensible authority or apparent authority is used in two main parts. ... However, in this case, Mr Pierce Hawthorne is not recognised as an agent but only as a Finance Manager of Blogon Breweries Pty Ltd. In this manner, we can cite the similarities of Mr Hawthorne to Chia in the Skandinaviska Enskilda Banken AB (Publ), Singapore Branch v Asia Pacific Breweries (Singapore) Pte Ltd and another appeal [2011] SGCA 22, where Chia was also a Finance Manager which has lesser authority when compared to the general manager. Also, Asia Breweries Limited (APBL) was a large corporation which has higher appointed officials. In the current case and the above statement may be supported with Armagas that ‘In the commonly encountered case, the ostensible authority is general in character, arising when the principal has placed the agent in a position, which in the outside world, is generally regarded as carrying authority to enter into transactions of the kind in question.3 In contrary to the First Energy (UK) Ltd v Hungarian International Bank, Ltd [1993] B.C.C. 53 3 (‘First Energy’), Mr Croft had negotiated and directly discussed with Mr Jamison who was the Senior Manager of Manchester office of HIB. He has ostensible authority because his position allowed him to ‘sanction large credit transactions together with another senior employee. Like many merchant banks and trading banks, HIB drew a distinction between internal authority to sanction a credit transaction and authority to sign a facility letter.’ As a support statement on the status of authority of Mr Hawthorne in the Blogon Breweries Pty Ltd, in the Skandinaviska Enskilda Banken AB (Publ), Singapore Branch v Asia Pacific Breweries (Singapore) Pte Ltd and another appeal [2011] SGCA 22, Chia as the Finance

Health and Physical Education Assignment Example | Topics and Well Written Essays - 1750 words

Health and Physical Education - Assignment Example (please circle) Individual Pairs Groups of ____6_______ Teams of____________ What do we do – what are the rules? How is the activity conducted? All groups divide into two groups of three, each going on the far side of one of the lines. Lining up, they take turns hopping like a kangaroo from one side of the play field across the line on the other side, releasing the next student to hop across to the other side. How do we include everyone? All children with the ability to hop would be able to participate, but should the class include a member who does not have the capacity to hop, the following modification can be made to the game: instead of hopping the game could be modified so that a ball is bounced as the child travels the distance or that they merely have to travel the distance, which at this point might be widened, passing an item from one person to the next in relay fashion. In this last form, any student that can move can participate, even, as an example, if they are in a wheelchair. How do we make it safe? Include the link to the most appropriate Curriculum Activity Risk Management Guidelines http://education.qld.gov.au/schools/healthy/ Go to this link and scroll down to sport. Select the category or activity that best represents your activities. You might need more than one category. http://education.qld.gov.au/schools/eppr/health/hlspr012/resources/trampolining.pdf While trampolining is a high risk and Kangaroo is a low risk, the same sort of use of the muscles exists, so some of the same risk factors will be included. Teaching the proper way to jump and how to hop from one point to the next would mitigate most of the risk in the game. Activity two:_____Bat and Ball Games____________________________________________ Organisation: How do we set up the activity? Set up a field similar to baseball with four bases at the corners of a diamond shape, but modified to be shorter distances for the age group that has been selected. Provide two fields of pl ay so that two teams of 6 each can be played at the same time. Two plastic bats and two plastic balls will be needed. How are students organised? (please circle) Individual Pairs Groups ________ Teams of___6_________ What do we do – what are the rules? How is the activity conducted? The modified rules of baseball are introduced with the introduction to running the bases after hitting the ball being at the core of the instruction. Children hit a tossed ball (instructors should pitch the ball) so that the opposing team runs to get the ball and then towards the bases. First one to get to the base is successful and the game continues. In other words, if the child who gets the ball beats the batter to the base, the batter is ‘out’. If the batter gets to the base first, they can continue forward from base to base as other hitters hit, each time over home plate counting as a score. The outfield does not exist in this modified version of the game. How do we include every one? Explain how you might modify this activity to ensure all students can participate. You are to imagine that your class has a child with cerebral palsy and think about the modifications that will be

Wind Power Essay Example | Topics and Well Written Essays - 1750 words

Wind Power - Essay Example World is facing major energy crisis due to the pollution attached to the presently available energy sources and technology. The commitment to develop clean energy sources is forcing economies to develop sustainable and clean power generation. Wind energy is a major source of clean power. It is important to mainstream this source of power as a clean alternative to support the power requirements. Use of wind as a reliable source of energy for various purposes like navigation, pumping water, grinding grains, sawing etc. is evident from the historical times. Wind is one of the cleanest sources of energy available in the world. The science of power generation from wind is rather simple. Earth is made of different materials, distributed unevenly all over the space and hence it absorbs heat from the sun with variance. During day, air over the land surface gets heated quickly than the air above water surface. Heating causes expansion of air and hence it becomes lighter and moves upwards and the heaver air replaces it causing wind. The process is reversed during night time, as air over the land surface gets cool quickly than the air above water surface. In simple words, wind is generated by movement of air between high pressure to low pressure area. In terms of energy flow, heat energy is converted into kinetic energy. Production of power from wind energy is quite interesti... Production of power from wind energy is quite interesting and it follows basic principles of energy conversion. Power is generated when the kinetic energy of the wind is converted to mechanical energy. This power could be used for generating electricity or power for running machines etc. Hence, wind power could be used for many purposes. The present day wind machines uses blades to collect the kinetic energy from the wind. When wind strikes the blades of the machines, it slow down the wind by capturing its energy and thus allows the blades to rotate. These blades are connected to a shaft at the centre which transfers its power to the electric generator to produce electricity. The interesting part is that in the entire process, there is no pollution involves with the process. Wind power is a potential form of renewable energy which is available to humankind. Although it has a long history, this source of energy is not mainstreamed due to lack of improved technology and huge production cost. Although developed much earlier, cheaper technologies were developed for power generation from alternate sources which alienated the use of wind power for commercial purposes. The cost factor had impacted this majorly. The major constrain of the wind power is the reliability factor as the power is generated only when there is wind. During lean period, one has to depend on other sources for power supply. This drawback makes it difficult for people to adopt this technology for daily use. The only alternative for this problem is to use other sources of power for the lean period. In the present scenario, energy is produced in the world from coal, crude oil, petroleum products, natural gas, nuclear, hydro, combustible renewables & waste etc. Most of these sources are

The Case for Islamo-Christian Civilization Essay

The Case for Islamo-Christian Civilization - Essay Example The successor state and the Caliphate, the Munghalsand the Safavids, Islam law development and interest issues that come because of the confrontation of medieval with the ideas of Aristotelian (center). The second issue was that the author wanted to avoid using the word margin and periphery, since the two words are commonly perceived as geographical words. These words take into consideration the center. The third reason involved the fact that terminologies like edge and cutting edge will fit into the contention of the edge in Islam instead of the center which is a place where many new categories of things occur. The author also argues out that the lack of an ecclesiastical hierarchy, the Islamic narratives put the institutions of politics at the story center like those of the Caliphate followed by the plethora of the succeeding states all having juris consults, judges, and inspectors of the market as identified by the sheria. This means that like individuals having full faith the Isl am find vital identity elements and solace in observing those practices that they encountered first. The local custom fails to provide guidance for the people who consider a shift in the identity of religion through embracing a varied ancestral faith or rather by changing to different religions. Though parallel in other religions, the edgde situations display creativity in the Islamic history, since getting the answers of some questions that are raised by the converts and Muslims exposes the ambiguities that underlie the spiritual authority. The future. In this section the author identify the case and speed communication as the two things, which separate the today edge from the ones in the past, and the de-valuation or the disappearance of the institutions. It is easy to find Muslims from every conditions and land accessing the world wide audience in an easy way. The author uses examples like a preacher inside the Harlem a political leader residing in Kuala Lumpur, a terrorist in Mo mbasa, and a feminist living in Marrakesh accessing similar audience with Shaikh al-Azhar of Cairo. The old authorities devaluation through the regimes that are modernized of the twentieth and nineteenth century and the establishment of the mass literacy of the youth by the very government have made many Muslims on the edge believe that they have the freedom of choosing the type of Ismalic brand, which best satisfies their circumstances. The perspective of the edge regarding the history of Islam shows that the resolution of the crisis will be depended of minimum ideas than on institutions such those which convince a larger portion of the Muslim segment. The author also suggests that a free market of religion and the beliefs is combined with blessing, at that time when the clouds of war gather and the region voice heard by Luslims who struggle to uplift their families in the sinking countries. Sinking, according to the author implies those countries that suffer as a result of poverty or disorder. These are the individuals who go in a certain religion for their moral and spiritual sustenance, and comfort that is derived from the living in a supportive and caring community of religion. The author is inclined to doubting the current Islam religion, whether it would be fruitful in the future. In this case, the author discusses the challenges that face the new institutionalizing experiments authority. Part 2 According ot the author, the future is characterized by

Differencies in substantive law and procedural law between common law Essay

Differencies in substantive law and procedural law between common law and civil law - Essay Example Civil Law gives its priorities to the doctrines and especially on the reports of codifiers over jurisprudence. The Common Law conversely, gives its priorities to jurisprudence over the canon. To elaborate on the difference of priorities between civil and common law, examining the different roles of legislator in the countries that practice the law (Tetley). For example, French law allows separation of powers since the courts only apply ruling while legislature work is to legislate and make laws. The other difference is that common law canon’s functions is to differentiate cases that appear unsuited to civics, and at some point may criticizes judgments that are made in court that seem to be biased according ruling. The civil law doctrines function is to avoid confusion that might cause a wrong judgment according to legal literature. Therefore, it provides the right procedure for judging difficult cases. Common law style of evaluating a case is different from the civil law style, since common law analyses cases that are similar in nature and extracts ruling from the previously set rules. The judge might add some rules and directions that do not exist to support the judgment made on the case. Civil law deals with legal principle that are firmly written to make decisions on certain cases (Tarr, 10). The judge comments on the history, the domain, and the application of the law accordingly without altering or adding some information. Therefore, the use and application of general mind is not allowed to be used in civil law to make judgments. Another difference is that civil law majors on the rights and compulsion to get the remedies of a case. It cannot make judgments without the use of legal doctrine that oversee the decision-making. On the contrary, common laws do not follow a set of guidelines or obligation to find a remedy to a case, but can add some knowledge of the

‘Utilitarianism Is Unsatisfactory as a Theory of Ethics Essay Example for Free

‘Utilitarianism Is Unsatisfactory as a Theory of Ethics Essay Utilitarianism is an ethical theory coined by an English philosopher who lived during the late 1700’s name Jeremy Bentham. Bentham believed in the principle that human beings should be motivated by pain and pleasure; he said â€Å"Nature has placed mankind under the governance of two sovereign masters, pain and pleasure† this meant that every human being’s goal in life should be to pursue pleasure and avoid pain and that these should be defining factors of what is moral. Utilitarianism is strongly based on this principle which is more commonly known as the principle of utility. The principle of utility is that an action is moral if it produces the greatest possible pleasure for the greatest possible number in any given situation. To carry out the theory of Utilitarianism accurately, Bentham devised an equation to calculate the happiness of a moral decision called â€Å"Hedonic Calculus†. I personally disagree with the claim that ‘Utilitarianism is unsatisfactory as a theory of ethics† although Utilitarianism has some flaws, the benefits and advantages of using Utilitarianism in most situations outweighs the disadvantages it has. Some critics say that Utilitarianism is unsatisfactory as a theory of ethics as it has many disadvantages. First of all, the Hedonic relies on knowledge of the consequences for an accurate calculation, however many consequences are hard to predict or may not be apparent till many years in the future. It is also difficult to quantify pleasure meaning it is hard to count pleasure into a practical number for use of comparison. Furthermore, some pleasures caused by situations can actually be morally wrong and likewise, some pains can be actually good for us. One of the most significant arguments against Utilitarianism is the problem of justice; although it produces the greatest good for the greatest number, the pleasure is not evenly distributed among the people affected, instead, a majority can benefit from the pleasure while others suffer. Moreover, in most situations, the minorities are ignored meaning that, in a utilitarian decision which produces the greatest good for the greatest number, the well-being of someone who is not included in the â€Å"greatest number† is not taken into account at all. Another criticism is that Happiness and pleasure is particularly subjective as one’s opinion of what is pleasurable can differentiate to extremes between different people. Lastly, Utilitarianism makes it moral to ignore obvious deontological principles with intrinsic moral value, for example, a utilitarian would say it is moral to kill a rapist, ignoring the fact that murder is immoral. Although Utilitarianism is not perfect, some people believe it is still satisfactory as an ethical theory because recently, philosophers such as Henry Sedgwick and Peter Singer has come up with updated versions of Utilitarianism which included principles which state that we should make moral decision which benefit the best interest of the people affected and that no ones happiness can be considered more valuable that another’s. Despite the flaws, Utilitarianism will always be a logical method of making decisions as it provides a democratic system which promotes general happiness. I personally believe that Utilitarianism is a satisfactory ethical theory as it is teleological and takes into account the consequences of a decision. Happiness and pleasure are also very logical things to base our decisions upon as humans were naturally born to pursue happiness and pleasure in their lives. It also avoids individual pursuits and puts egoism into a universal theory which benefits the majority of the society and mankind.

Material Failure Analysis

Material Failure Analysis Question 1) There are axles on all vehicles such as cars as the axle supports the wheels parallel to the opposing wheel whilst holding the balance of the body of the car. It also transmits torque from the axle to the wheels to give it power that is efficient in the movement of the car. Other vehicles such as heavy-duty trucks will not have a shaft like the front beam axle therefore it serves only as a suspension and steering component. (Vehicle Axle, 2017) It is likely that the rear wheel axle was failed by fatigue as this is very common. The axle must be able to carry the weight of the vehicle and any cargo that has been loaded. This is usually directed at heavier vehicles such as commercial vehicles that carry around goods. Over time the axle could wear down if excess stress is applied to the axle. This is called a high-cycle fatigue which can be shown by an S-N curve otherwise known as the Wohler curve. August Wohler was a German railway engineer, best remembered for his systematic investigations of metal fatigue. (August Wohler, 2016) As we can see from Figure 1, this is a Wohler curve example for brittle aluminium that shows when you apply stress over the Ultimate Tensile Strength (UTS), the life reduces over time and wears out and would break which relates to if stress above the UTS is applied on the rear axle it could also lead to it breaking. When too much stress (more than what the recommended axle capacity) is applied to the vehicle, the axle begins to form small cracks wearing down the structural integrity over time. Stress on the rear axle could also be applied from things such as driving in harsh conditions like bumpy roads or potholes. Another very common reason (especially older vehicles) if the vehicle does not get the proper maintenance that could damage the vehicle over time from parts such as shafts, gears, components of the axle or rusted parts that have not been cared for. (How do you break an axle?, 2017)ÂÂ   These therefore could potentially lead to the axle breaking by fatigue over time. The way we can analyse if the rear axle was broken on impact is by using a method called fractography. Fractography is a method that is used to determine the cause of failure of engineering structures. (Fractography, 2017) For material science, fractography is used to check crack growth behaviour. The method used for this is carried out by using an optical microscopy (figure 2) with angled lighting on the broken axle to find out the degree of cracking and possibly the origins. This process is enough to pinpoint the cause of the cracking and the growth pattern. Common reasons that could cause the material to crack are contaminations, stress concentrations etc. In conclusion many factors can separate if the rear axle breaking was caused by fatigue failure or failure on impact. It could vary for reasons such as if the vehicle had been carrying a heavy load over time for example a commercial vehicle that carries goods that is heavier than the Ultimate Tensile Strength (UTS) of what the axle can hold. Proven by the Wohler curve over time the life cycle of the axle will wear down and eventually break. For vehicles that do not carry loads that apply excess stress on the rear axle, the reasoning of the axle breaking could be from natural causes from the environment such as speeding over potholes, parts rusting or no proper maintenance on the vehicle could lead to the structural integrity breaking down over time causing it to be in an accident. By using fractography on the broken axle could show leads to why the accident was caused by looking at the cracks and the pattern of the spread to see if it was caused by load or not. Question 2) A pulley is used to lift heavy loads or to change the direction of forces applied. It consists of a wheel with grooves on an axle that can be driven with pulley systems like wire rope, cable, chain etc. These pulleys can operate using applied human force to lift heavy objects. The reason why humans can lift heavy objects with the pulley is because the pulley system such as wire rope transmits the tension force around the pulley allowing humans use no effort because there is no energy loss because of the friction. However for much heavier items that humans cannot lift, machinery is used such as cranes. If the pulley system does not dissipate or store energy, then its mechanical advantage is the number of parts of the rope that act on the load (Pulley Systems, 2017). Wire ropes are usually made from a non-alloy carbon steel with a very low carbon content of 0.4 to 0.95%. (Carbon steel rope, 2017) This allows the rope to have an extremely high strength that can hold large tensile forces and be able to operate sheaves (pulley with a groove) with somewhat small diameters.ÂÂ   If no chemical/mechanical damage, excessive heat or corrosion is involved in the wire rope failing then the rope will fail in the sector which has been exposed to the highest amount of abrasion and fatigue. This means that the likeliest sector that the wire rope failure will occur can be predicted. Wire ropes also vary from different aspects such as the number of outer strands and the size of the core. For example if you had less outer strands, the core would not be able to hold the load however the outer strands will hold it instead. On the other hand, if you had more strands, the core would be bigger therefore it would hold the load however the outer strands become loose over time but that would not make the rope fail. One way the wire rope could have failed is the end of the rope wearing out over time in a Flemish eye and could potentially come apart causing it to fail due to the load exceeding the weight limit of the bond between the Flemish eye and the wire rope. There are many ways that the wire rope can be terminated to prevent and stop this from happening. These include methods such as thimbles, clamps, sockets etc. with termination efficiencies that range from 70-100%. However there are also cons with some termination methods such as thimbles. There is the risk that when the wire rope is terminated, it could bend too tightly especially when the loop is connected to a device that concentrates the load on a relatively small area.(Wire rope bend, 2017) The wire ropes need to have a strong structure requiring it to have been stressed by things such as wear and corrosion. It also needs to be inspected using a magnetic method capable of detecting inner wire breaks. (Wire rope Safety, 2017) A frequent cause for wire rope failure is corrosion. This is due to the use of a little lubrication or lubrication that has not penetrated inside the rope. The rope inspector will not see the wire rope corroding due to lubrication on the outside however the rope would be destroyed internally by corrosion and abrasion and when it goes to lift a heavy weight, it would create a great amount of damage. Another way damage can be caused it called jumping the sheave which is not where the rope does not slip/jump out of the sheave but it fails to get into the sheave of the wheel instead. Steel wire ropes have a high melting point therefore can be used in hot environments such as Ladle cranes (Ladle cranes, 2017) as seen in Figure 4. However if the steel wire ropes stay in the heat for too long, the material anneals therefore making it dangerous. There are multiple ways we can analyse why the wire rope failing one of them being microscopic analysis. The wire rope can be analysed through this method to see the cracks in the steel. It can then be run through a Scanning Electron Microscope (Scanning electron microscope, 2017) done by X-ray analysis and X-ray mapping which can show every forking point of the wire as if the wire was extremely brittle. Pulley systems have been used for a very long time and can be traced back to Mesopotamia in 1500 B.C. (When was the pulley invented?, 2017) so we can see that it is a very useful technique to present day. Therefore I conclude that the reason behind the rope failing is due to fatigue. There are several safety precautions for exceeding the weight limit such as Flemish eye. However there too many fatigue reasons that outweigh the limit of the rope such as the amount/types of stresses and environmental factors that can also be analysed through SEM (Scanning Electron Microscope) to see cracks in the wire rope. Question 3) Arc welding is a common method that fuses metals together. The way this is done is by using a welding power supply that could be alternating (AC) or direct (DC) current that creates an electric arc between an electrode and the base material. (Arc welding, 2016) This then melts the base material to its welding point and then the melted metal will create a weld between the metals. The weld will then cool fusing them together (can be seen in figure 7). Arc welders must be trained and equipped with PPE (Personal Protective Equipment) such as visors due to the fact that arc welding produces harmful Ultraviolet radiation and toxic fumes from metals. If they do not take these precautions UV radiation can lead to ocular damage and the toxic fumes can lead to occupational disease. A major defect that arc welding could have is cracks (Figure 8). There are many types of cracks within the weld and it only takes one type to fail a weld inspection. You cannot go over the crack with more welding to cover it up as the weld will not be strong over use especially in relation to the missile leaning on the steel which would not last long and could cause damage therefore the weld needs to be filed/grinded out and done again. Â   One type of cracking is called cold cracking. It is not noticeable at first however over time it will be because hydrogen absorbs into the weld puddle affecting the weld. This could be because of moisture seeping into the electrode before welding. Another type of cracking is called hot cracking and this is noticeable right after welding. The reasoning behind this crack could be poor joint design that would not diffuse the heat. One of the other reasons behind hot cracking could be impurities such as the presence of sulphur in the welding metal which could cause problems such as change the cooling within the weld. Many precautions can be taken to avoid cracks within the arc weld such as checking your welding equipment i.e. test your machine before you generate current to the electrode and keep your welding rod and metals in dry conditions so hydrogen or sulphate does not affect your weld. You should also make sure your plates are clean and grinded well so the arc weld fit without any problems such as the welding joint. Steel has a very low carbon content between 0.05-0.25% which is easy to weld with because it would not harden by heat treatment. Therefore there will be less hardened zones in the heat affected zone because as carbon content increases, welding gets harder because of the quenching action. The microstructure of the weld metal is needed for the alloy of the carbon steel but in carbon, carbon manganese and micro alloyed steel, the weld metal structure is mostly affected by the welding. The structure of Carbon steel is usually affected by things such as the cooling time, plastic strain, composition etc. The Heat Affected Zone (HAZ) is the area of the steel plates that has had microstructure and properties altered by welding (Heat-affected zone, 2016). The speed and temperature of the welding plays a big role as it decides the spread of heat onto the parent material (HAZ diagram figure 9). Different types of processes such as electron beam welding gives off high concentrated limited amounts of heat that results in Heat affected zone. For arc welding in steel, the HAZ is split into three sections being the intercritical, supercritical and subcritical from a metallurgical point of view. Heat affected zones are impossible to see because it makes it hard to manage the bending angle therefore the only way to remove the entire extension of the HAZ is to machine it away (Dealing with HAZ, 2017). Methods to analyse weld testing are utilized to guarantee the quality of the weld after it is finished. For the most part this refers to testing and analysis concentrated on the quality and quality of the weld, yet it may refer to actions to check for the position, intensity of welds. A common method to analyse these welds are image-based such as X-ray using Machine Vision (MV). This method is done by and inspector manually to look at images of the weld and come up with a conclusion of the quality and correctness of the weld. In conclusion, there are many deciding factors such as the microstructure when it comes to its behaviour and properties. We know that the cooling rate and composition of the welding is important in the formation of microstructures in the welding metal. I would recommend welding the steel in controlled situations at described above to prevent cracks. We know the carbon content of the steel increases therefore the weldability decreases and the hardness increases. I believe arc welding in a controlled situation such as dry conditions and testing machinery before use is a low risk of being affected by things such as sulphate and hydrogen. Question 1) Vehicle Axle (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Axle#Vehicle_axles August Wohler (2016) in Wikipedia. Available at: https://en.wikipedia.org/wiki/August_W%C3%B6hler File: BrittleAluminium320MPa S-N curve.svg (2016) in Wikipedia. Available at: https://en.wikipedia.org/wiki/File:BrittleAluminium320MPa_S-N_Curve.svg How do you break an axle? (2017) Available at: https://www.reference.com/home-garden/break-axle-7c5da780a7e83eb2 Fractography (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Fractography https://en.wikipedia.org/wiki/Optical_microscope#/media/File:Optical_microscope_nikon_alphaphot_%2B.jpg Question 2) Pulley Systems (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Pulley#Rope_and_pulley_systems Carbon steel rope (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Wire_rope#Construction Wire rope Safety (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Wire_rope#Safety Ladle cranes (2017) Available at: http://www.casar.de/Rope-Selection/Ladle-Cranes Scanning electron microscope (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Scanning_electron_microscope#Materials SEM Scanning (no date) Available at: https://www.mri.psu.edu/materials-characterization-lab/characterization-techniques/scanning-electron-microscopy-sem When was the pulley invented? (2017) Available at: https://www.reference.com/history/pulley-invented-8dcaf2574d30b8ea Wire rope bend (2017) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Wire_rope Question 3) Arc welding (2016) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Arc_welding Welding diagram (2003) Available at: http://www.globalspec.com/reference/80954/203279/chapter-6-metal-arc-welding-with-coated-electrodes Arc Welding Cracks (2016) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Welding_defect#/media/File:Welding_cracks.svg Heat-affected zone (2016) in Wikipedia. Available at: https://en.wikipedia.org/wiki/Heat-affected_zone Dealing with HAZ (2017) Available at: http://www.thefabricator.com/article/shopmanagement/all-you-need-to-know-about-the-heat-affected-zone

Death and Freedom in Sorrows of a Young Werther and Crime and Punishmen

Death and Freedom in Sorrows of a Young Werther and Crime and Punishment The relationship between death and freedom is a common thread throughout Sorrows of a Young Werther by Goethe and Crime and Punishment by Dostoevsky. The relationship illustrated in both works is that one cannot achieve true freedom until they are dead. Until death, Werther and Raskolnikov will always feel the restrictions that society places upon them. Werther feels restricted due to the unrequited love of Lotte and Raskolnikov feels restricted by the moral code that society establishes. In Sorrows of a Young Werther by Goethe and Crime and Punishment by Dostoevsky both characters’ exhibit their freedom through death. In Sorrows of a Young Werther, Werther views suicide as a human right and the ultimate expression of one’s power. Death representing freedom is evident in Weather’s suicide because he feels that he cannot go on living in such torment. The only way to free him from this torment is to kill himself. In Crime and Punishment death representing freedom is evident in Raskolnikov’s justification for the pawnbroker’s murder. He justifies the murder first through it’s circumstances. When Raskolnikov discovers that Lizaveta will be out of the house at seven, he views this information as a sign that the murder must be committed, â€Å"all liberty of action and free-will were gone.† Next Raskolnikov claims that the pawnbroker deserved to die and it was his duty to rid society of â€Å"the wretched li...

Why Cant We All Just Get Along? :: essays research papers fc

Why Can’t We All Just Get Along?   Ã‚  Ã‚  Ã‚  Ã‚  The concern of weapons of mass destruction is perhaps one of the largest growing issues in the world today. These weapons are a threat to everyone; actually, they are a threat to the existence of the world, and it is for this simple reason, why there is concern regarding this topic all over the globe. â€Å" [The threat of weapons of mass destruction is] A Damocles sword poised on the neck of the human race, the magnitude of the threat they pose cannot be overstated† (Sid-Ahmed, 1). It is for this reason efforts are being made to ban the use of and/or destroy weapons of mass destruction all over the world. The question is, will the prohibition and destruction of weapons benefit the world or will it put us at a disadvantage?   Ã‚  Ã‚  Ã‚  Ã‚  If all nuclear weapons in the world were destroyed, the world would certainly benefit because the threat would be eliminated. America is making efforts to eliminate nuclear weapons all over the world. They have decided it is a good idea to go into other countries and â€Å"peacefully† force them to stop production of and destroy their nuclear weapons. The New York Times states, â€Å"Iraq has to get rid of its biological and chemical arms and missiles and the means to make them, and abandon its efforts to develop nuclear weapons† (NYT, 1). This of course sounds like a splendid idea because the less nuclear weapons we have, the less chance people have to use them, but then the United States goes on to give Iraq an ultimatum. â€Å"That [the destruction of the nuclear weapons] can be accomplished in one of two ways. Iraq can make a full declaration of its weapons arsenal this weekend, and then work with the UN to destroy the arms. If it doesn’t , the United States is likely to use military forces to disarm Iraq† (NYT, 1). While the intentions of the United States are noble enough, they are not going about getting results in the most intelligent manner because by â€Å"threatening† Iraq they seem as if their motives are not quite what they seem. It is almost a hypocritical concept because the United States says that they want to eliminate violence, but they are going about it by threatening other countries. The Tehran Times of Iran shows us how they view what the United States is trying to do.

because I like them but just because these products are advertised. :: essays papers

How does media influence the male and female body Media is the most important factor that influences us on how we view our body’s image. Throughout time, we saw how many famous singers and actors were role models for our society. It is an unpleasant fact, that we see these perfect figures as our role models, and struggle to have a perfect body as they do. Advertisements also show models that have perfect figures and they use these models to sell products that unfortunately damage our bodies. We take every necessary action to achieve that goal of having a perfect body. Personally, the media also influences me and I buy certain products, not because I like them but just because these products are advertised. Initially, many famous singers and actors have perfect figures and as they appear in the society, they show us that this is how we should look. For example, if I see a singer or an actor on TV or in a magazine, I look at them and then I start comparing my body to theirs. I feel like I need to change my body and wear clothes that the celebrities are wearing, so I could become more like them. Moreover, when I see myself in the mirror, I get a negative view of myself and I start feeling very uncomfortable about the way I look. Luckily, I do not go too far to change my body but there are people who take drugs, change their eating habits, or even go through painful surgeries to change their body. If we present our society with actors and singers who are more like an average person then we might save many men from taking certain drugs and women from getting breast implants. Advertisements also influence our society on how we view ourselves. We see so many advertisements where models are smoking and drinking alcoholic beverages. All of these advertisements presented to adults and children are spreading a negative message; these advertisements are proving that smoking and drinking is all right for our bodies. None of these advertisements expose how these products will damage our bodies. These advertisements do not care about our health; they are more concerned about their profits. Many teenagers start smoking because of these advertisements and most of them keep smoking until the day this poison kills them.

Personailty Disorders in the Workplace

People with personality disorders characteristic tend to have chronic inflexible styles of perceiving themselves, and interacting with others varies. (Ward, 2004) Personality disorders are typically some of the most challenging mental disorders to treat, because they are part of an individual and their self-perception. Treatment according to Ward, (2004), most often focuses on increasing coping skills, and interpersonal relationship skills. This paper will discuss a few of these disorders, such as Antisocial Personality, Borderline Personality disorders, and Insomnia.I will attempt to describe the various disorders and how they affect employer/employees in the workplace. We will look at the symptom logy observed by co-workers and/or supervisors for those with the different disorders. I will provide similarities and difference in how supervisors or co-workers would intervene with people with these disorders. The end result will be to provide appropriate organizational intervention str ategies for those living with these disorders. Antisocial Personality Disorders (APD) According to (Babiak, and Hare. 2006).Personality disorder behavior, is like a disease, is antiquity, and nothing about it changes. Antisocial personality disorder (APD) is one of the disorders describe in the Psychopath in the Workplace: A Cautionary Tale, written by Paul Babiak and Robert D. Hare. The authors describe how a common misconception is that antisocial disorder refers to people who have poor social skills. On the contrary, the opposite is often the case, instead, APD is characterized by a lack of conscience people with this disorder are prone to criminal behavior, believing that their victims are weak and deserving of being taken advantage of. Babiak, and Hare, 2006) Antisocial tend to lie and steal according to the authors. Often, they are careless with money and take action without thinking about consequences. They can sometimes become aggressive and are much more concerned with thei r own needs then the needs of others. â€Å"They may appear to be superior. † Candidates for business leadership position and many of them rise to the positions of power and influence in business community. † (p. 2) The authors express how a socially facile psychopath may expertly deceive the average person. Snakes in suits† is the term the authors used to describe an antisocial person. (p. 2)They give descriptive lucid, richly detailed guide for corporate business professionals who are interested in understanding how important and often unrecognized behavior syndrome is acted out in the workplace. They believe this knowledge and information they give in their book Snakes in Suits: When Psychopaths Go To Work is essential if â€Å"socially responsible and ethical individuals are to protect themselves and their organization against ruthless, fraudulent, manipulative behavior. (P. 2. ) It’s imperative that leaders and employees become aware and knowledgeable of this behavior if they are to protect themselves and their resources from exploitation. (Babiak, and Hare, 2006) These individual may appear impressive, because of their motivated ambitiousness, social charm, and self-confidence, yet closer observation of their behavior and inspection of their motives reveals that they posses qualities of ruthless exploitations deceitfulness, pathological lying, and a wiliness to use antisocial and even criminal behavior to achieve their goals. Babiak, and Hare, 2006) According to Babiak, &Hare (2006) the symptoms that antisocial personality disorder display, and should be observed by leaders, and employees are as followed:  ·Disregard for the feelings of others  ·Impulsive and irresponsible decision-making  ·Lack of remorse for harm done to others  ·Lying, stealing, other criminal behavior  ·Disregard for the safety of self and others Borderline Personality Disorders Borderline personality disorders are described by Babiak, & Hare,(200 6), characterized by mood instability and poor self-image.This disorder, according to the authors was named because it was originally thought to be at â€Å"borderline† of psychosis. The disorder is relatively common, affecting 2% of adults. Women are more likely to suffer borderline than men. Nearly 20% of psychiatric hospitalizations are due to this disorder. (Babiak, and Hare 2006) People with this disorder are prone to having mood swings and or bouts of anger. Often taking anger out on themselves, causing pain and injury to their own body. They are suicidal, and think in black and white terms, which often form intense, conflict-ridden relationships.They are quick to anger when their expectations are not met. The symptoms that employers/employees may observe are: Self-injury or attempted suicide Strong feelings of anger, anxiety or depression that last for several hours Impulsive behavior Drugs or alcohol abuse Feelings of low self-worth Unstable relationships with friends , family, and boyfriends/ girlfriends and co-workers Treatment could involve therapy in which the patient learns to talk through his/her feelings rather than unleashing them in destructive and self-defeating ways.Medication may be helpful, and treatment of any alcohol or substance abuse issued should be required. Insomnia We have looked at Antisocial Personality Disorder (APD), and Borderline Personality Disorder (BPD). However, now I would like to prevent Insomnia, a disorder that is profound and many people suffer everyday because of it. According to authors of Handbook of Mental Health, Insomnia in the workplace is characterized by many different behaviors. People who suffer from insomnia call into work more because they are sick more.Insomnia can have a negative affects on the workplace, reducing the ability of affected employees to maintain adequate productivity and safety on the job, impairing their overall quality of life. (Thomas, and Hensen, 2002 p. 351) People who suffer f rom insomnia are slower to complete assignments and short attention spans. Some people even put themselves and co-workers into dangerous situation if they are driving or working heavy machinery. Treatments for insomnia is commonly bought at most grocery stores. Sleep aid like â€Å"SleepyTime† can be purchased easy to help sleep.However, using medication can cause addiction, and cover up what’s really the problem. Psychological treatment can aid in getting to the â€Å"root† of the problem. (Thomas, & Henson, 2002 p. 358). Durand, & Barlow, (2010), created a list of psychological treatments for insomnia, which are; cognitive, guided imagery relaxation, graduated extension, paradoxical intention, and progressive relaxation. (Durand and Barlow, 2010, p 332) Leaders and employees who need to recognize the symptoms and behavior that an Insomniac may display: Lateness Absent Sleeping on the jobPre occupied Unmotivated Bosses and co-workers who are aware of each other â€Å"normal’ work habits can observe and offer intervention, and resources that can help people with this disorder strive for effective treatment. (Thomas, & Henson , 2002, p. 363). Supervisory Intervention When considering intervention, Employee Assistance Programs (EAP’s) maybe one of the more comprehensive means of addressing psychopath in the workplace. (Thomas, & Hensen, 2004). Organizational leadership can play a tremendous role in the implementation of treatment modalities in the workplace.The members of the Leadership should make as many attempts as needed and possible to maintain and environment with minimal stressors. Leaders and organizations that have the holistic well-being of everyone involved, should implement healthy, well being programs, that are designed to improve productivity for everyone involved. Supervisors must observe, and realize the impact of unhealthy behavior to the organization, like cost, law suits, accidents, violence, and decrease of production and increase in expenses due to sickness / work compensation.Supervisors need to focus and observe behavior respectful approach the situation, without alienating or making the person feel as if gossip or singling out is not the goal. Leaders need to be empathic, and genuinely concern with ones well-being; excellent communication skills and being well informed could enhance the probability of the person with the disorder agree to intervention. EAP programs are designed to address a multitude of issues that plague the workplace. The programs and find alternative resolution, to help elevate stresses that prevent productivity.Furthermore, employees have an obligation to themselves, as well as their employers. Telling someone that a problem exists could save time, money, and mental illnesses. Observing a fellow employee who is having difficulties should be reported to supervisors, and not gossip about amongst fellow employees Subsequently, we all must become responsible for t he healthy well-being of ourselves and find balance in our personal lives, in order to live stress free and well- rounded.References 1) Durand V. M, & Barlow D. H. , (2010) Essential of Abnormal Psychology , Belmont, CA, Wadsworth, Census Learning 2) Hare, R. D, & Newman, C. S. (2006) , Handbook of Pschopathy , New York Gulford Press 3) Illinois Institute for Addiction Recovery, (2005-2009), Proctor Hospital 4) Thomas, J. , & Hensen, M. (2002), Handbook of Mental Health in the Workplace. Thousand Oak, CA: Sage Publication. 5) Ward, K. R. (2004), American Family Physicians, Leawood.

International Trade and Finance Speech Essay

The purpose of this paper is to organize a speech that will be provided to a number of reporters that are not knowledgeable with economics. In this paper I will put importance on international trade and foreign exchange rates and how those affect the GDP, domestic markets, and students. I will also outline some of the benefits on goods and services that are imported from other countries and how those contribute to our economy in the United States. What happens when there is a surplus of imports brought into the US? When there is a surplus of a product imported into the US, it drives the prices of that particular product down. The reason it drives the prices down is because the owner of the product gets to a point where they need to clear out inventory so they sell it at a price lower than originally expected. These companies will go as far as taking a loss on the product just to clear the inventory. This surplus is a plus for the consumer. (Armadeo, 2013) Car dealerships are a prime example of companies that clean out old inventory at a reduced price. They run end of year specials that are hard to beat. One dealership had a Chevrolet Malibu for $22,110. The end of year pricing deal they offered was $3000 cash back or 0% interest on a 60 month loan. When deciding which offer is the best, a person must first look at what the percentage of interest is that they would be paying on top of the loan amount. (Mello, 2012) What are the effects of international trade to GDP, domestic markets and university students? The international trade effect on the GDP depends on if it is a surplus or deficit. If the imports are lower than exports this will have a positive effect on the GDP, domestic markets, and university students. A positive effect in the GDP increases the job market. This in turn increases money into the economy and increases sales in the local markets. This also helps the university student find a job to help finance their education. This also allows them to buy supplies for school cheaper, for example, the price of computers become lower when there is a positive effect on all these things. International trade increases options for the consumer to choose from, therefore the price on these items are more competitive. Negative effects will do the complete opposite. (McTeer, 2008) How do government choices in regards to tariffs and quotas affect international relations and trade? Simply put, tariffs are taxes the government imposes on imports. Quotas are numerical limits set by the same government imposed on the same imports. If the country imposing the tariffs and quotas set the tariff too high then this could cause future issues between the two countries. If a country wants to have a good relationship with a country they will impose lower tariffs. (â€Å"The Basics of Tariffs and Trade Barriers†, 2011) What are foreign exchange rates? How are they determined? A foreign exchange rate is the cost of converting different currencies. For example, if the foreign exchange rate for the euro is 100=$1 then 100 euros equals $1. If it costs 125 euros to exchange for $1, then the euro is not as profitable as the dollar. Exchange rates are generated by the volume of currencies acquired and sold. â€Å"Though they are affected in both the short term and long term by innumerable factors, currency supply and demand will always, ultimately, determine currency prices in the foreign exchange markets† (Sisson, 2012). Why doesn’t the U.S. simply restrict all goods coming in from China? Why can’t the U.S. just minimize the amount of imports coming in from all other countries? If the United States were to restrict all goods coming in from China it would negatively affect our relationship with them. The United States is majorly in debt to China. Upsetting them could cause them to call in all our loans. It will also affect the profitability of China’s investments and their supply in which American companies are operating. The United States cannot decrease the amount of goods coming in from other countries because it would have a huge impact on employment and the cost of items in this country. A variety of items cause them to have more competitive pricing. When you do not have people working, there is less money to be spent back into the economy. All of these reasons greatly impact the United States economy. The United States needs to trade with countries with more promising tariffs and quotas, and try to keep things fair between imports and exports to help promote a better GDP. References Mello, T. B. (2012). Sweet year-end deals available on some popular cars. Retrieved from http://www.nbcnews.com/business/sweet-year-end-deals-available-some-popular-cars-1C6750390 Armadeo, K. (2013). The US Trade Deficit. Retrieved from http://useconomy.about.com/od/tradepolicy/p/Trade_Deficit.htm McTeer, B. (2008). The Impact of Foreign Trade on the Economy. Retrieved from http://economix.blogs.nytimes.com/2008/12/10/the-impact-of-foreign-trade-on-the-economy/ The Basics of Tariffs and Trade Barriers. (2011). Retrieved from http://www.investopedia.com/articles/economics/08/tariff-trade-barrier-basics.asp#axzz2KI2v2hAC Sisson, N. (2012). ehowmoney. Retrieved from http://www.ehow.com/about_6593199_exchange-determined-markets-foreign-exchange_.html Colander, D. C. (2010). Macroeconomics. : McGraw-Hill.

Purity of Aspirin by Spectrophotometry Essay

The mass of acetylsalicylic acid was determined using a analytical balance. Sodium hydroxide (NaOH) was added to the acetylsalicylic acid and heated in order to hydrolyze acetylsalicylic acid. Iron chloride was added to each volumetric flask as the purity of the aspirin can be tested by addition of Fe+3 to a suspension of the product. Phenols such as salicylic acid react with iron chloride to form coloured (violet) complexes Aspirin easily absorbs green light and green is the compliment of violet, which allows a determination of the amount of aspirin present. The percentage purity of aspirin was found to be 90. 62%. Aspirin tablets (about 5-grams) are usually compounded of about 0. 32 g of acetylsalicylic acid, which indicates that aspirin should be about 94% pure. The calculated value for aspirin content was close to the true value and indicates that aspirin sample tested was very pure. .Introduction Aspirin is a member of a family of chemicals called salicylates. This chemical can be converted (changed) by the body after it is eaten to another chemical, salicylic acid. Salicylic acid may be irritating because it is an acid; therefore one of the acidic parts was covered up with an acetyl group, converting it to acetylsalicylic acid (ASA). ASA not only could reduce fever and relieve pain and swelling, but better for the stomach and worked even better than salicylic acid. Salicylic acid produces a salicylate dianion, when dissolved in water, which reacts with an acidic solution Fe (NO3)3(aq), to produce a strong violet tetraaquosalicylatroiron (III) complex. The violet color of the complex results from the fact that the complex strongly absorbs green light. When this green is removed from normal white light, we observe violet (therefore, green is the compliment of violet). This absorption of green light can be used to quantitatively determine the amount of aspirin present in the solution. The more green light that is absorbed, the more violet the solution, and hence, the more salicylate is present. If green light is directed into a solution that contains this aspirin complex, some of the green light will be absorbed. The intensity of the green light leaving the sample, I, is less than the original intensity of the green light, I0. We can talk about the fraction of light that was transmitted through the sample, transmittance (T); or we can talk about the amount of light that was absorbed by the sample, absorbance (A). Transmittance is inversely proportional to absorbance: the more light that passes through the sample, the higher the transmittance and the lower the absorbance; conversely, the less light that passes through the sample, the lower the transmittance and the higher the absorbance. Several standard solutions of the salicylate complex are prepared. The absorbance of each standard solution is measured at the wavelength of maximum absorption of green light (530 nanometer) using a spectrophotometer. A graph of these absorbance values versus the concentration of each of the standards should yield a straight line. This relationship is known as Beers’ Law: A = a b c A is the absorbance of the solution, a, is the molar absorptivity (a constant for this complex), b is the path length of cuvette (in cm), and c is the molar concentration of the solution being measured. The absorbance of a solution is directly proportional to the concentration of that solution. Therefore, the molar concentration, c, of a solution can be determined by simply measuring the absorbance, A, of that solution. Since we are actually measuring the absorbance of the complex, the stoichiometry of the reaction producing the complex is 1:1. So, if we know the concentration of the complex, we know the concentration of the aspirin. The concentration, the amount of acetylsalicylic acid and purity of aspirin sample will be determined by using Beer’s Law plot. The concentration and absorbance of sodium salicylate will be found, thus being able to find the percentage purity of aspirin.

Emerging Trends Essay

Communications technology is progressing at light-speed, seemingly shrinking our world, as we can now communicate and conduct business in real time around the globe. Through innovations such as high-speed modem technology, businesses and people can share new ideas with friends and colleagues from the farthest lands. As more people and businesses strive to globalize, existing communication technologies are overloading, as they have approached the limitations of today’s available hardware. To gain higher speed access to the available information over the Internet, there are many factors one must research, as they ultimately work together. These factors include hardware, choosing an Internet Service Provider (ISP), as well as a modem, which will be used to send and receive the data via the Internet. The intent of this document is to review the latest high-speed technologies for improving information access using the Internet. By understanding these new technologies, one can make a more informed decision when choosing their hardware and ISP. Choosing Hardware for Individual Needs: Computer Choices To gain faster Internet access requires choosing a faster computer that best suits one’s needs. In determining the type of computer to purchase, one should first determine the application in which it will be used most. Applications such as word processing, computer games, and Internet access, all require various hardware and operating systems. Today, there are three main choices for computers, which include laptops, PCs, and hand-held devices. â€Å"Until recently, we only needed to decide on the type and speed of the processor that we wanted in our new computer, since most of the Intel Pentium based computers had a data bus with a maximum speed of 66 MHz† (PC World, 2000, July, p. 33). â€Å"With the release of the new Intel 100 MHz bus architecture, this has changed, as the new line of Pentium II and Pentium III processors use this new bus instead of the older 66 MHz bus† (PC World, 2000, July, p. 33). Needless to say, a PC equipped with this much power will su rely increase the communication speed between the processor and components in the computer. The main advantage of a notebook computer, versus a desktop, is the size and portability. Due to their smaller size, notebooks are the computer of choice for people that have limited space in their office or home. â€Å"A typical notebook computer will contain either an Intel Celeron, Pentium III, or AMD K6 processor, which all range in speed, while the more common speeds vary from 600 MHz to 850 MHz† (PC World, 2000, July, p. 37). The price of a standard notebook computer typically ranges between $1200 to $1900. Introduced in 1996, handheld computers, also known as Palm Pilots and Personal Digital Assistants (PDAs), have been gaining in popularity. These devices are portable and are no larger than a palm-size calculator. One of the most popular models on the market today is the Visor, offered in three models, ranging from $149 to $249 (Businessweek Online website, November 15, 1999, p. 192). While the speed of a handheld computer may vary, according to one source, the Palm Vx model runs slightly faster than other handhelds. â€Å"It runs with a 20mhz processor versus the 16mhz found in other models† (Palmgear website, 2000). Most palms come with standard applications like an address book, calculator, and a date book. Newer palms will also allow the user e-mail capabilities, using a memo pad similar to the Windows notepad. Since Internet access is now available as an option for handheld computers, they are a viable choice for consumers. Choosing an Internet Service Provider (ISP) Next, one needs to decide on an Internet Service Provider (ISP), and whether it is for personal or business use. Today, many companies offer free Internet Service to consumers and businesses. Broadband Digital Group (BDD) offers free dial up service at no additional cost, and is available nationwide. Another free ISP is Bluelight.com, which allows customers to shop online and receive various discounts on items purchased with Kmart. Free ISPs are economical and provide many of the services of fee based ISPs, such as sending and receiving email, web surfing, and online shopping.   Although some people find free ISPs to be economical, there are some disadvantages. Free ISPs represent less than 13 percent of the market, and are used as an alternate means to connect online (Fusco, 1999, pars. 4-6). With this, the customer is provided with Internet access, but not the quality service that is provided by most fee-based ISPs. In some cases, free ISPs do not provide consumers with high-spee d delivery, which results in slower connection speeds. According to a recent report by Patricia Fusco, fee-based Internet access service providers are among the elite and provide high quality, high speed, and wireless services. The top rated ISPs are, AT&T WorldNet, EarthLink, Inc., MSN, America Online, CompuServe, and Prodigy. All of these services can provide consumers with high-speed service, good customer service, and technical support (Fusco, 2000a, pars. 2-10). There are, however, some disadvantages with fee-based ISPs, as the monthly billing fees can range from $7.00-$40.00 per month. In addition, providers such as AOL, Prodigy, MSN, and CompuServe have monthly billing plans that must be applied to a customer’s major credit card or telephone bill. Payment by check is also an option, however, your ISP provider applies a surcharge. Fee based ISPs benefit people and companies who have a need for high capacity, high-speed, and a broad range of features. Providers like AT &T and MSN offer wireless service plans, so consumers have the option of accessing the Internet through their laptops or personal PDAs (Fusco, 2000b, pars. 4-6). In determining which ISP is best, one should consider cost, speed, availability, and technical support. The content of the ISP’s website, personal services, and customer satisfaction should also be considered. Choosing a High-Speed Modem Technology: Cable vs. DSL Of course, there is much more to achieving high-performance Internet access than just choosing a fast computer and an Internet Service Provider, as one will also need a connection capable of handling all of this bandwidth. Recently, there are new emerging technologies that will allow you to access information over the Internet at blinding speeds. Today, one can choose between new high-speed subscriber lines, such as Digital Subscriber Line (DSL) or Cable Modem, which enables one to access information over 10 times faster than the 56K modem. To utilize DSL will require a DSL-capable modem, which connects to the phone lines already present in the home. Installing DSL is a bit tricky. Although there are installation kits available, it is easier to have the phone company install the service, since installation requires a few components needed for avoiding interference while using the modem and telephone at the same time. The cost of installing DSL runs between $50-$100, while the monthly service fee averages about $80 per month, and includes an ISP (PC World, 2000, May, p. 106). DSL is not yet offered in all areas, however, a recent survey from The Yankee Group estimates that 21% of US households will have access to DSL shortly (PC World, 2000, May, p. 104). Cable Modem is another high-speed solution for accessing the Internet. Cable Modem technology offers similar performance as DSL, yet the technology is a bit different, as it utilizes the existing television cable in the home. Like DSL, Cable Modem access will require a special modem and can be installed by the consumer, or by a local cable company. Expect to pay approximately $100 for the installation, while the monthly service fee averages about $50 per month (PC World, 2000, May, p. 106). The Yankee Group estimates that 41% of US households will have access to Cable Modem technology, which is limited to those households already equipped with cable television services (PC World, 2000, May, p. 104). 87% of Cable Modem users and 86% of DSL users are satisfied with the performance, according to a PC World survey (PC World, 2000, May, p. 116). While the monthly service fees are more for DSL, as compared to Cable Modem, the fees are expected to normalize as the technology becomes more widespread. In reviewing these high-speed technologies, the choice begins to shift from choosing between DSL and Cable Modem, to choosing between either of these two, along with any of the new computers. Summary This study reveals that to gain high speed connectivity, any of the new computer hardware choices are adequate. The key to high speed information access is now governed by your connection, where this situation was revered just a few short years ago. DSL and Cable Modem both offer substantial performance improvements over conventional 56K Internet access. Either choice enables high-speed Internet access, which will be a vital component as more and more on-line information begins to congest the information pipeline. To truly gain high speed Internet access, one must incorporate either of these new modem technologies, along with their choice of hardware, which should be based on one’s individual needs. References Businessweek Online website. (November 15, 2000) The Palm is Mightier†¦, [Available] Retrieved March 31, 2001, from the World Wide Web: www.businessweek.com Fusco, P. (1999, December). Jupiter: Free ISPs won’t replace dial-up access (16 paragraphs). InternetNews – ISP News Archives, [Available] Retrieved March 31, 2001, from the World Wide Web: www.internetnews.com Fusco, P. (2000a, May). AT &T Wireless Debuts Free Wireless Internet (15 paragraphs) InternetNews – ISP News Archives, [Available] Retrieved March 31, 2001, from the World Wide Web: http://www.internet.news.com/isp-news/article/0,,8_356751,00.html Fusco, P. (2000b, September). J.D. Powers Ranks Big Six ISPs (19 paragraphs). InternetNews – ISP News Archives, [Available] Retrieved March 31, 2001, from the World Wide Web: http://www.internetnews.com/isp-news/article/0,,8_460761,00.html Overton, R & Goavec, P. (May 2000). PC World – Broadband or Bust, Volume 18, Number 5. 102-108, 112, 116 Palmgear website. (Copyright 2000, internet.com Corp), [Available] Retrieved March 31, 2001, from the World Wide Web: www.palmblvd.com

How does films Crash, The Amistad and American History X describe and Essay

How does films Crash, The Amistad and American History X describe and debate integration in America today - Essay Example Naturally, racism itself is a complex term due to the fact that it is not one-sided or attributable to a singular group. The fact remains, as will be mentioned within this analysis, that racism easily crosses lines of color and can exhibit itself in a number of situations. As a means of analyzing such question, the author of this brief essay will analyze the way that three films represent the issues associated with racism: â€Å"Crash†, â€Å"Amistad†, and â€Å"American History X†. The first of the films which will be analyzed, entitled â€Å"Crash†, is perhaps the most complex analysis of racial issues within society. This is affected by the fact that rather than merely introducing the issue of race and expounding upon it within the story line, the filmmaker uses race and its interpretation between the various groups represented as vehicle of plot development and exploration. Moreover, by seeking to defined race and racism within the context of each of the different groups represented, white, black, and Latino, the viewer is made distinctly aware of the fact that a simple and convenient understanding of racism as being one-dimensional is not sufficient to comprehend the realities that are represented. This multidimensional representation of racism is useful due to the fact that society and filmmakers have traditionally only represented the issue from a given perspective (Sharma 2010). However, by representing the issue in a way that shows the give and take nature of race and racism within the society, the viewer is able to notice how traditional understandings of racism are ultimately encouraged and propagated by the views that â€Å"others† hold with relation to the topic. Accordingly, the second film that will be discussed, â€Å"Amistad†, relates the story of a slave uprising aboard a slave ship bound for the United States. This particular film represents well represents the moral bankruptcy of the practice of slavery as well as

Conflicting Reward Systems and Their Impact on Criminal Justice Research Paper - 1

Conflicting Reward Systems and Their Impact on Criminal Justice Administation - Research Paper Example It is also going to analyze why a person ‘A’ should not suffer at the expense of reward of person ‘B’. Conflicting Reward Systems and Their Impact on Criminal Justice Administration Introduction: The role of criminal justice system According to May, (2008), criminal justice is rights respecting treatment that is deserved by virtue of criminal conduct. It is concerned with the responsibility of controlling crime and ensuring the due process is followed. For example, in US justice system, prisons are expected to provide basic human needs in a favorable environment. There is a very great relationship between law enforcement, the judicial system, and the corrections. The law enforcement agents are mandated to ensure there is law and order in the society (May, 2008). The judicial system issues judgments to people found guilty. They send the criminals to correction centers where the criminals obtain various correction programs as they serve their jail term. In thi s case, prisons renounce idleness and offers constructive employment, and recreation activities to the prisoners. Harr, (2008) noted that the criminal justice system addresses the human needs of prisoners with an aim of expressing faith in them. This goes in line with the purpose of prisons other than punishing them, to correct the prisoner. This idea helps the prisoners maintain their humanity and cooperate with the programs designed to rehabilitate them. The aim of inclusion of criminal justice system is to abstract values and not to punish the prisoners. Conflicting Reward Systems and Their Impact on Criminal Justice Administration On the other hand, reward systems encompass rewarding specific persons involved in the criminal justice system (Schmalleger, 2007). For example, judges are re-elected due to their hard sentencing of criminals by sending them to prison. The same case applies to prosecutors who move large number of cases to court alongside quick settlement of the cases. However, such a move can only serve the interest of the rewarded persons while neglecting the interest of others (Schmalleger, 2007). In light to this assertion, it can be argued that hard sentencing of criminals for example drug addicts would not add any value to the criminals. After completion of their jail term, drug addicts can still go back to their usual habit of addiction. In this regard, instead of judges sending such criminals to prison, it would be much better if the drug addicts are referred to drug rehabilitation centers Harr, 2008). This way, they would get necessary treatment and counseling that would see them abandon drugs and start a new life. Although not all criminals can be subjected to alternative correction centers, most of them can actually be subjected to such institutions. Some of the most effective correction institutions that could help criminals deter from committing crimes includes boot camps, which are particularly practiced in military setups, house arr ests, restitution and electronic monitoring (Hodge, 2009). If these programs are more utilised, the criminal justice systems would be seen to be meeting their goals and objectives. In some instances, additional funding for expanding jail facilities is another form of reward for those jails that are seen to be efficient in being harsh on criminals. This reward tends to pay no attention to programs like rehabilitation centers which have facilities like education and various job training which would go a long way in correcting criminals (Solhkhah & Wilens,

Tips for Trainers Research Paper Example | Topics and Well Written Essays - 250 words

Tips for Trainers - Research Paper Example article, the comic trainee who attempts to make jokes and a well delivered joke uplifts the session while a mistimed one or an explicit one can increase awkwardness. This particular type lies somewhere between the chatterboxes and the challengers as they tend to add unwanted humor based on their own experiences, most of the time with long explanations (Shetty, 2010). One can counter chatterboxes (talkative) trainees by paying more attention to them and asking them questions about the training subject. The introverts or slow learners (passive) trainees may open up if they are paired up with chatterboxes and made leaders of the group in training activities, asking them questions can result in a childish silence so encourage them in non-direct ways or throw really easy questions at them. The know-it-all or challenger (angry) type can be handled by recognizing their contribution and then throwing the same question back at them, new information or facts can satisfy them and only a confident trainer would subdue their high self confidence so knowing the inside out of subject area is very important, irrelevant questions or experiences can be kept for after the training discussion usually held one to one. You do not want to hurt somebody’s feelings as a trainer, if a joke is delivered well and taken well by the participants then the comedian can get confident and make more tries although as a trainer you have an agenda to follow hence you should always tell the participants that the session is for learning purpose and that we should get back to the topic at

Research Paper Example | Topics and Well Written Essays - 750 words - 4

Research Paper Example This decision of making the truth known to the public is based on the ethical principle of transparency, which is an important part of communication â€Å"...based on the notion of an honest exchange† (Plaisance 44). It was mentioned in the commentary that despite Wilson’s transparency and honesty in verifying that Niger was not actually capable of exporting uranium ores due to stringent measures in the whole process, the Bush Administration decided to keep the public blind to this truth, and even dismissed Wilson’s report. This lack of transparency in reporting about the status of the uranium imports of Iraq from Africa abused the trusting nature of the public and kept them away from the issues that Wilson actually experienced first-hand, and this prompted him to air out his concerns regarding the misconception of most people with the real issues in Iraq and Saddam Hussein. The act of transparency is also rooted in the belief that people have a right to know abo ut the truth, and that the distortions of information could cause not just misinformation in the audience but also unprecedented troubles such as panic and disorder (Plaisance 47). Wilson chose not to keep quiet about how the information he knows got dismissed for the sake of the public, and he wrote it out in his commentary under the ethical principle of transparency. Question 2: Place yourself in Wilson’s position. What kinds of decisions/choices would you make if you were in the same situation? Would you have written the piece? Which philosopher and/or ethical philosophy help guide your decisions? The act of being transparent in communication is not just involved with some issues like whether or not there are hidden motives for transparency, but also the trust of the people involved in these communications is also at stake. Wilson banked on this ethical guideline in giving the public true information in creating his commentary on how his report regarding the true status of the Iraq-Niger uranium connection was silenced by the administration, which consequently perpetuated the fears within people about the potential danger that Iraq poses. His defiance of the information dispersed by the government was shown in his commentary, and while it might have cost him his life, it was worth knowing that at least somehow he did not simply stand and keep his silence. If I was in the same position as Wilson was, I would have done the same and have written a similar piece, maybe add additional and credible information for the reading public. Since this is important information that the public has a right to know but the government keeps from them, I feel that as a public servant I have a duty to the people of delivering them the truth. I would also do the same thing that Wilson did, by writing his own account of what really happened, and letting the people decide on the authenticity of my work. If I put myself in Wilson’s place on writing the commentary abo ut the reality of Niger not really having the ability to bring uranium ore illegally to Iraq, I would have chosen to be transparent with what I know, not just to regain the public’s trust on some members of the government, but also to assure them that not all threats are real, and that

Human Resource Development Essay Example | Topics and Well Written Essays - 1500 words - 1

Human Resource Development - Essay Example According to Fisher(1996), more positive group climate, more cooperative behavior on tasks, more productivity in accomplishing tasks, faster problem solving, few errors in solving problems and less hostility among members are most prominent characteristics of an interpersonally compatible group. Any organization can use these findings to create a motivated environment by understanding the internal environment of the organization. With the importance of development of human resources highlighted, next it is essential that the role of awards has on improving the effectives of the training and development programs has to be analyzed. In this paper, the essentials of a good employee development program are discussed. Then the role of the National Training Awards(NTA), instituted by the UK government to improve the efficiency of the training and development of human resources is explained. In the current era of globalization the business environment is so rapidly changing that it is challenging for the managers to foresee the changes that are going to occur in future. The organizations have to be continuously take efforts to equip themselves to cope with the ever-changing business environment. ... But at this point of time, it is not sufficient that a company just grows, but it can serve the best interests of its stakeholders only if it can ensure sustained development. United Kingdom has a long history of good corporate governance and managerial excellence, but can this excellence sustain the competition from the emerging economies is the biggest question. The UK companies have to be prepared to withstand the onslaught of efficient products and services from Asian economies like China and India for example. Hence, it becomes very essential that the corporations realize the need for careful development of their human resource in order to have a sustained growth. Thanks to the information technology, that geographical distance does not define the sphere of business transactions. Hence, companies have to be ready to face the competition with their strengths better toned. The institution of the NTA is the need of the hour to emphasize the importance of quality human resource to h ave growth. Importance of self awareness In a study by Whetton and Cameron(2005), 402 individuals were asked to name the most effective managers and the skills they have, the main factors listed were verbal communication, managing time and stress, managing decisions, influencing others, delegating, self awareness and team building. Self awareness here implies awareness at the individual level, team/ department level and as a whole in the organization level. It can be often observed that in a business organization, managers are faced with the challenge to modify the day to day operations to achieve the long term strategic goals and vice versa. This may be due to the gaps between the aspirations and the actions

The Impact of Technology in the Delivery of Healthcare Research Paper

The Impact of Technology in the Delivery of Healthcare - Research Paper Example Thus in 1998, The Committee on the Quality of Health Care in America, or CQHCA was established in order to develop plans to create substantial improvement in healthcare quality (IOM, 2001). A report released by the OIM contained the findings and recommendations of the committee, and it was mentioned that the committee gave emphasis on the support of meticulously and well-thought of designs in making the health care delivery system a lot more safer, much more effective, as well as being patient-centered, suitable to the patients’ needs, reasonable and competent (IOM, 2001). Both of the IOM reports showed how medicine and innovation can work together for better results, and it can be accomplished by the use of information technology. Using information technology as the means to implement changes in the health care industry means that the system would be upgraded to give better and more reliable results for both patients and health personnel (IOM, 2001). The main goals that were set by the CQHCA that utilize information technology were developed to address the following aspects of the health industry: Safety – there are evidences showing that automated order entry system can bring down the number of errors in drug prescription and dosage administration. Effectiveness – there are evidences showing automated reminder system improves the compliance rate with clinical protocols and guidelines. Patient-centered – information technology can be used to facilitate access to clinical information through Web sites and online support groups: and tailor fit health education as well as disease management information. Timely – IT can provide clinicians and patients timely information through Internet-based communication such as telemedicine and e-visits. Efficiency – clinical decision support system made possible by IT reduces the need for redundant laboratory tests. Equity – provision of broader range of options for interaction through Internet-based communication with clinicians to all people, regardless of ethnicity, race, geographical location, and socio-economic status. Electronic Health Records through Information Technology Electronic health record (EHR) is a system that is composed of electronic devices, computer programs, active users such as medical personnel and providers, support mechanisms, and other enhancements that not only document care, but also improves its provision (Amatayakul & Lazarus, 2005). It is a collection of health information of individual patients or of groups of people or a population that can be retrieved electronically from a closed system of programs. It may include the patient’s personal data such as age, weight, medical history, laboratory tests, and billing information. Overall, EHR is a clinician’s tool that manages various areas of patient care (Carter 2001). The most common computer systems and their functions in order to make electronic health records as efficient as possible are shown in table 1.